DashboardDashboardLog inTry Free for 2 Hours

How to set up a proxy in Proxifier

This guide shows how to set up a proxy in Proxifier, so the programs on your computer connect through it. You need four things from your proxy: the host, port, login and password.

If you do not have a proxy yet, see mobile proxies and pricing.

AtlasProxies Team · Updated · 3 min read

  • 1Choose HTTPS for an HTTP ProxyFor a proxy bought as HTTP, choose "HTTPS" in Proxifier, and for SOCKS5 choose "SOCKS Version 5".
  • 2One Proxy Setting at a TimeTurn off proxy settings inside your apps, or a connection can go through the proxy twice.
  • 3Rules Pick the AppsProxification Rules let you send only the programs you choose through the proxy.
On This Page
  1. What you need
  2. Choose the right protocol
  3. How to set up Proxifier
  4. Send only some apps through the proxy
  5. Check that it works
  6. If it does not connect
  7. When the IP rotates

What you need

Copy your proxy line from My Proxies. It holds the host, port, login and password. A proxy is one line: host, port, login and password. It works with any tool that takes an HTTP or SOCKS5 proxy.

Also note the protocol the proxy was bought with, HTTP or SOCKS5. You can switch it any time from My Proxies.

Before you start, turn off any proxy setting inside your apps or browser. Otherwise a connection can go through the proxy twice.

Choose the right protocol

Proxifier lists four protocols: "SOCKS Version 4", "SOCKS Version 5", "HTTPS" and "HTTP". Use this table to match your proxy.

Your proxy in My ProxiesChoose in Proxifier
SOCKS5"SOCKS Version 5"
HTTP"HTTPS"

Good to Know. In Proxifier, "HTTPS" means an HTTP proxy that can carry any connection, so it is the right choice for a normal HTTP proxy. Proxifier's own "HTTP" type carries plain HTTP connections only. Picking "HTTP" is a common mistake.

How to set up Proxifier

These steps are for Proxifier v4 for Windows. The Mac version has the same settings under slightly different menus, and names can differ slightly between versions.

Step 1: Open the proxy list

Open "Proxy Servers" in the "Profile" menu, or click its toolbar icon. Then click "Add".

Step 2: Enter the server

Put the host in "Address" and the port in "Port". Choose the "Protocol" from the table above.

Step 3: Add the login

Under authentication, turn it on. Enter your login in "Username" and your password in "Password".

Step 4: Test it (optional)

Click "Check" to open the built-in "Proxy Checker" and test the proxy.

Step 5: Make it the default

Click "OK". When Proxifier asks whether to use this proxy by default, click "Yes". It becomes the target of the Default Proxification Rule.

Step 6: Close the list

Click "OK" in the list. New connections now go through the proxy while Proxifier is running.

Send only some apps through the proxy

Open "Proxification Rules" in the "Profile" menu and click "Add". Fill in "Name", choose the program in "Applications" and set "Action" to your proxy. "Target hosts" and "Target ports" are optional.

Rules are read from top to bottom. To send only chosen apps through the proxy, set the "Default" rule's action to "Direct" and add a rule for each app. Leave the built-in "Localhost" rule enabled.

Check that it works

The "Proxy Checker" tests the proxy itself. To check your setup, open a "what is my IP" page in a program that goes through Proxifier, such as your browser with its own proxy setting off. It should show the proxy's IP, not your own.

If it does not connect

  • The wrong protocol is selected. Use "HTTPS" for an HTTP proxy and "SOCKS Version 5" for a SOCKS5 proxy, as shown in My Proxies.
  • There is a typo or an extra space in the login or password. Copy them again from My Proxies.
  • The host and port are in the wrong fields. The host goes in "Address" and the port in "Port".
  • The proxy has expired. Check it in My Proxies.

If a program shows a login error, read 407 Proxy Authentication Required.

When the IP rotates

Your proxy gets a new IP on the timer you set, from every 5 to every 120 minutes. The host, port, login and password stay the same, so nothing in Proxifier has to be changed after a rotation. Read more about rotating mobile proxies.

Good to Know. Destination websites may still restrict or block access. Use must follow the platform's rules and our Acceptable Use Policy.

Frequently Asked Questions

Which protocol should I choose in Proxifier?

Choose "HTTPS" for a proxy bought as HTTP and "SOCKS Version 5" for a proxy bought as SOCKS5. Proxifier's "HTTP" type carries plain HTTP connections only.

How do I add a proxy to Proxifier?

Open "Proxy Servers" in the "Profile" menu, click "Add", and fill in "Address", "Port", "Protocol" and the login. Click "OK", then "Yes" to make it the default.

Can Proxifier send only one app through a proxy?

Yes. In "Proxification Rules", set the "Default" rule's action to "Direct" and add a rule for that app with your proxy as its "Action".

Does Proxifier work on a Mac?

Yes. The Mac version has the same settings as the Windows version, under slightly different menus.

Why does a connection go through the proxy twice?

An app or browser has its own proxy setting turned on as well as Proxifier. Turn off the proxy setting inside the app.

Your first mobile proxy is two minutes away.

Sign up, pick a country, and your login arrives in seconds.